HPA
Refine Search
AMPED CUSTOM - INTEGRAL GRIP LINE (IGL) (FOR WOLVERINE, P*, REDLINE (Black)
PRODUCT DESCRIPTIONThe Amped Integrated Grip Line or IGL is Amped Airsoft’s original solution for re..
$35.00
Polarstar Kythera Nozzle
For cylinder conversion systems we assign numbers to the nozzles instead of using the rifle model. T..
$31.00
Polarstar F2 Nozzle
The measured tip length should be within +/- 0.010" of an exiting nozzle to be compatible. If the ti..
$31.00
Andy's Airsoft Amped Line | Amped HPA Line Standard Weave
PRODUCT DESCRIPTIONThe Amped Line was developed during the rise in popularity of High Pressure Air (..
$50.00
Wolverine STORM Category 5 Regulator
The STORM Category 5 is the next evolution of the STORM regulator, the original dedicated airsoft re..
$210.00
Polarstar Jack Nozzle
The measured tip length should be within +/- 0.010" of an exiting nozzle to be compatible. If the ti..
$31.00
EMG Wolverine Airsoft Genesis Arms Licensed Magazine for MTW "Dracarys" Gen 12 Airsoft HPA Shotgun
FeaturesFully licensed by Genesis ArmsHigh strength polymer constructionCompact design with 140rd ca..
$45.00
valken 68/4500 Carbon Fiber Tank with Standard Regulator
Features: Ideal for the PolarStar PR-15 / Fusion Engine Standard Regulator with Alloy Bonnet..
$270.00
PolarStar Kythera SA Metering Screw (1pc)
These metering screws are used to adjust the speed of the nozzle as it returns forward. There is a p..
$15.00
Andy's Airsoft 400mAh HPA Battery 7.4v Lipo (JST) 30C
Item Weight 18.1 g Product Dimensions 4.3 x 1.7 x 2 cm Batteries: ..
$18.00
Wolverine PTS EPM-MTW M4 Magazine for MTW/Article
DetailsWorks with MTW-Spec empty mag detectionFits the MTW and Heretic Labs Article IApproximately 1..
$40.00
HPA Solenoid Air Tubing 1/16"/1.6mm ID (1 Foot)
Clear urethane tubing in 1/16" (1.6mm)Sold by the foot.This tubing is used in Fusion Engines to rout..
$5.00
Valken Tank Pouch (Black, Tan, OD)
Description Available in Black, Olive, and Tan. Mounts to molle either vertically or horizonta..
$39.00
PolarStar Fusion Engine Nozzle AK
Fusion Engine air nozzles allow you to shift the velocity range of your rifle up or down to bes..
$30.00
Amped Line Female Foster Quick Disconnect Coupler
This is a standard female quick disconnect coupler compatible with a female 1/8" NPT.Utilizes m..
$20.00
Valken V2.0 13ci 3000 PSI Aluminum Paintball Tank 13/3000
Need a compact, cost-effective tank for your HPA setup? Look no further!Capacity:13cubic InchesPress..
$85.00
Valken 48 3000 Aluminum Paintball Tank (48 cubic inch 3000 PSI) 48/3000
Description These high quality aluminum high-pressure air tanks were designed with safety as a..
$95.00
Polarstar V2 Fusion Engine Switchboard (Gen 3)
Version 2 switchboard for GEN3 Fusion Engine. Header Identification: J1 = Main Harness, J2 = Poppet..
$40.00
PolarStar Fusion Engine Rev2 FCU Wire Harness - 13"
This replacement PolarStar wire harness is constructed with 24 AWG wire for superior continuity and ..
$15.00
Heretic Labs MTW Speed Trigger (Black / Red)
The Heretic Labs speed trigger offers next level feel and adjustability for any MTW-Spec platform...
$55.00
Wolverine O-Ring Kit for REAPER M
Replacement O-rings for your REAPER Gen 1 or Gen 2 engine. Does not include O-rings for solenoid val..
$10.00
TechT Gun Sav Premium Lubricant tech-t
TechT Gun Sav Performance grease is some of the best grease you can find on the market for your airs..
$20.00
O-Ring Kit for WRAITH X
IncludesAS-568 015 (x2)1mm x 5mm1.5mm x 18mm1.5mm x 8mm1.5mm x 19mm1.5mm x 15mm2mm x 6mm1mm x 4.5mm ..
$10.00
MTW Billet Series Gen 3 10" (Inferno Gen 2) M4
Standard FeaturesGen 3 Billet Receiver SetINFERNO Gen 2Spartan Electronics MTW Control BoardInvictus..
$930.00
Wolverine MTW 308 Modular Training Weapon (SR25)
A BIG MTW for BIG gameplay!For the serious DMR player, Wolverine Airsoft proposes a big, bold, ..
$1,200.00
Polarstar MCU 18" Wire Harness (Universal)
The MCU wire harness is intended for use with REV3 FCU's that feature the built in MCU (Motor Cont..
$12.00
PolarStar Kythera SA (Semi Auto) V3 AK
The Kythera has been the most eagerly anticipated products from PolarStar in the past decade. This H..
$385.00
Polarstar JACK drop in kit (V3 AK)
“JACK” was designed to answer the demand for an affordable, high performance HPA conversion for AEG'..
$475.00
PolarStar Fusion Engine V2 GEN3
These have a Red Nozzle and Red Poppet installed directly from Polarstar!Have you ever dreamed of Po..
$750.00
Polarstar Fusion Engine Low-Flow Poppet Valve (Red)
The Poppet Valve is the part which controls air flow through the Fusion Engine™. The valve is avai..
$60.00