Wolverine

HPA Solenoid Air Tubing 1/16"/1.6mm ID  (1 Foot)

HPA Solenoid Air Tubing 1/16"/1.6mm ID (1 Foot)

Clear urethane tubing in 1/16" (1.6mm)Sold by the foot.This tubing is used in Fusion Engines to rout..

$5.00

MTW Electronic Control Board

MTW Electronic Control Board

Replacement control board for the MTW Billet Series. The new black version includes an optical selec..

$130.00

Wolverine MTW Trigger Assembly

Wolverine MTW Trigger Assembly

OEM replacement trigger assembly for Wolverine MTW. Not compatible with Reaper M...

$25.00

Wolverine STORM On Tank regulator

Wolverine STORM On Tank regulator

STORM OnTank is the first regulator designed specifically for airsoft. With ultra-fast recharge ..

$190.00

Wolverine MTW Filtered Grip Line (10", Gen 2) FGL

Wolverine MTW Filtered Grip Line (10", Gen 2) FGL

Keep dirt and debris out of your investment with this filtered grip line from Wolverine.Compatible w..

$42.00

Wolverine Inferno Gen.2 Replacement O-Rings

Wolverine Inferno Gen.2 Replacement O-Rings

Wolverine Inferno Gen.2 Replacement O-Rings..

$10.00

Wolverine WRAITH AERO PDW CO2 Stock - FOR MTW ONLY

Wolverine WRAITH AERO PDW CO2 Stock - FOR MTW ONLY

Using the technology of our WRAITH AERO, we have designed a PDW type stock option for the MTW. Thi..

$340.00

Wolverine O-Ring Kit for SMP

Wolverine O-Ring Kit for SMP

Replacement O-rings for your SMP engine. Does not include O-rings for solenoid valves, banjo fitting..

$10.00

Wolverine MTW Inferno Gen2 HPA Powered M4

Wolverine MTW Inferno Gen2 HPA Powered M4

Carbine Package Contents: MTW 14.5” barrel 13” MLOK rail SBR Package Contents: MT..

$930.00

Wolverine MTW Advanced Feed Tube Assembly

Wolverine MTW Advanced Feed Tube Assembly

Integrated engine retention clip and feed tube assembly. Easier installation and fewer dropped BBs..

$40.00

Wolverine MTW Advanced Electronics Kit

Wolverine MTW Advanced Electronics Kit

This kit allows you to upgrade your MTW Billet Series control board to the Forged Series advanced el..

$200.00

Wolverine gen 1 Filtered Grip Line FGL

Wolverine gen 1 Filtered Grip Line FGL

Features:Filtered lineQD connector nippleThreaded line adapterCompatibility: For Wolverine Gen1..

$42.00

Wolverine Airsoft Premium FCU (Gen 2)

Wolverine Airsoft Premium FCU (Gen 2)

Control burst modes, dwell time, and rate of fire right from the FCU with an intuitive LED/switch co..

$100.00

Protech Airsoft MK2 Nozzle for TM AK V3

Protech Airsoft MK2 Nozzle for TM AK V3

This Protech Airsoft MK2 Aluminum Nozzle will allow you to install your MK2 HPA Unit into a Toyko Ma..

$25.00

WRAITH X for AEG

WRAITH X for AEG

Lose the line, not the performance, with WRAITH X!Everything is included in the box to run your choi..

$400.00

Wolverine WRAITH AERO Air Stock - FOR MTW ONLY

Wolverine WRAITH AERO Air Stock - FOR MTW ONLY

AERO STOCKOVERVIEWThe Wolverine Airsoft WRAITH: Aero Stock is an adaptation of our CO2 stock that wa..

$370.00

Wolverine V3 Wire Harness (12")

Wolverine V3 Wire Harness (12")

12" wire harness for V3 gearboxes...

$35.00

Wolverine REAPER Gen 2 Electromechanical For V2

Wolverine REAPER Gen 2 Electromechanical For V2

DescriptionFeaturesConsistent seating force regardless of operating pressureAir-saver can be tuned w..

$430.00

Wolverine O-Ring Kit for STORM

Wolverine O-Ring Kit for STORM

Replacement O-rings for your STORM regulator.IncludesAS-568 010 (x1)AS-568 016 (x1)1.2 x 5mm (x1)1.5..

$10.00

Wolverine O-Ring Kit for REAPER

Wolverine O-Ring Kit for REAPER

Replacement O-rings for your REAPER Gen 1 or Gen 2 engine. Does not include O-rings for solenoid val..

$10.00

Wolverine MTW-9 Tactical Inferno Gen2 HPA Powered SMG

Wolverine MTW-9 Tactical Inferno Gen2 HPA Powered SMG

A beautiful SMG compatible with and providing the toughness, modularity, quality of an MTW. Up you..

$1,150.00

Wolverine MTW-9 Standard Inferno Gen2 HPA Powered SMG

Wolverine MTW-9 Standard Inferno Gen2 HPA Powered SMG

*NOTE: PRODUCT INCLUDES ORANGE TIP.A beautiful SMG compatible with and providing the toughness, modu..

$1,050.00

Wolverine MTW-9 PDW Inferno Gen2 HPA Powered SMG

Wolverine MTW-9 PDW Inferno Gen2 HPA Powered SMG

A beautiful SMG compatible with and providing the toughness, modularity, quality of an MTW. Up you..

$1,250.00

Wolverine MTW Forged Limited Edition (Inferno Gen 2)

Wolverine MTW Forged Limited Edition (Inferno Gen 2)

THE LAST ONE EVER!!!Due to the unavailability of forged receivers, Wolverine Airsoft decided to do..

$2,200.00

Wolverine MTW Forged (Inferno Gen 2)

Wolverine MTW Forged (Inferno Gen 2)

Behold the MTW Forged Series. Wolverine Airsoft’s flagship Airsoft Replica, like all MTW’s it has be..

$1,300.00

Wolverine MTW CNC Curved Trigger Assembly

Wolverine MTW CNC Curved Trigger Assembly

Features CNC ConstructionErgonomic DesignFully adjustable Comes standard on the MTW Forged Series...

$45.00

Wolverine MTW Bolt Catch & Pin

Wolverine MTW Bolt Catch & Pin

Replacement bolt catch and pin for the MTW. CNC manufactured with aircraft-grade aluminum...

$40.00

Wolverine Inferno Gen2 Premium Edition (V3/ak)

Wolverine Inferno Gen2 Premium Edition (V3/ak)

The GEN 2 Inferno features a revolutionary single solenoid, independent poppet and nozzle desig..

$560.00

Wolverine Inferno Gen2 Premium Edition (V2/m4)

Wolverine Inferno Gen2 Premium Edition (V2/m4)

The GEN 2 Inferno features a revolutionary single solenoid, independent poppet and nozzle desig..

$560.00

Wolverine Inferno Gen2 Premium Edition (M249)

Wolverine Inferno Gen2 Premium Edition (M249)

OVERVIEW The GEN 2 Inferno is the culmination of a great deal of work to take the next step forwa..

$560.00

Showing 1 to 30 of 79 (3 Pages)