THIS RIFLE IS NOT FOR BEGINNING PLAYERS

The Silverback MDR-X is our airsoft licensed version of its real steel counterpart manufactured by Desert Tech LLC.

Very realistic in its conception, to mimic the original build and features as much as possible while integrating a high-quality gearbox , able to deliver high performance from DMR to CQB applications.

Realistic construction and assembly

  • Made under exclusive license from Desert Tech LLC
  • Fully engraved markings with unique serial number.
  • 6000 series aluminium receiver/outer barrel and muzzle brake.
  • PA6 Nylon, fiberglass reinforced stock, grip and handguard, synthetic rubber buttpad.
  • MLOK handguard, with 3 slots at 3, 6 and 9 o’clock.
  • 2 steel QD attachments at the rear of the stock.
  • Ambidextrous fire selector and 3 points magazine release.
  • Swappable realistic ejection panels.
  • Realistic motion ambidextrous cocking lever.

 

High quality Gearbox

  • Designed to operate on 11.1V Li-Po batteries (possibility to run on 7.4V)
  • Electronic trigger, CPU motor control, gear cycle and fire selector position detection by Hall Effect sensor.
  • CNC aluminium wide bore cylinder (26mm diameter, +19% wider than standard AEG), including a spring quick change design.
  • Useful volume 22.5 cc ( with stock ventilated 75% cylinder)
  • CNC aluminium cylinder head, NBR piston damper, stainless steel nozzle.
  • CNC aluminium ventilated piston head, FKM o-ring, POM glider ring.
  • CNC stainless steel & aluminium spring guide, equipped with a thrust bearing. 3 lugs design ensuring a better axial alignment.
  • “Tappet plate-less” construction.
  • CNC aluminium piston body, hardened MIM steel 16 teeth rack.
  • 18:1 torque up gear set, hardened MIM steel.
  • ADC 12 aluminium gearbox carter, 10mm ball bearing.
  • Neodymium high-torque motor 19000RPM (11.1V), short axis.

 

Efficient hop-up design

  • Hop-up unit made of durable Polycarbonate material.
  • TDC, rotary ring design.
  • Incremental “click” adjustments using 2 ball plungers, 36 positions ranging from 0 up to 750 µm with the low nub (installed, for standard bbs configuration), and from 500 up to 1250 µm with the high nub (provided, for heavy bbs configuration).
  • 420 mm brass inner barrel. 6.05 mm bore, chemical passivation surface treatment, AEG hop-up cut.

 

The MDRX is coming with:

  • 78 rounds AR10/SR25 type magazine (G&P / A&K Type)
  • Two additional power spring (*).
  • One semi auto only replacement trigger board (semi/ full auto trigger board installed out of the box) (**).
  • A pin puncher for easy battery change and disassembly
  • 4 keys (Allen 2.5mm, Allen 5mm, Torx T20 and Torx T25).
  • One high nub for the hop up unit, to lift bbs from 0.32 grams and above (low nub installed out of the box).
  • One PCB jumper, used to switch from 11.1V to 7.4V batteries or deactivate battery protection (***)
  • Online User Manual

    Online Exploded Views

    Please note that after August 10th, 2023, The Silverback MDRX in our stock has been updated by Silverback, updates are as follows:

    • New bevel gear - Now properly dimensioned, it will reduce strain on battery, motor, and electronic control, and will considerably reduce the noise of the gearbox.
    • New nozzle disconnection Oring - solving inconstancies issues on the original production, this new one will improve feeding and durability.
    • New nozzle/delayer springs - With a better balance, improving feeding with third-party magazines.
    • New delayer screw - Avoiding potential interactions with the spring guide.
    • New motor setting screw - easier to adjust and lock.
    • Better insulated main control PCB (ETU) - Preventing some short circuit potential issues.
    • New Buttpad - Offering direct access to the battery bay, avoiding a full opening and potential damage to motor wiring


    For those who purchased the MDRX AEG before August 10th, 2023, please register your purchase with Silverback here so you could get the parts mentioned above to upgrade your gun as well as a care package that includes the following items: 

    • Tool key for the cylinder head/bb tube/nozzle and motor setting screw
    • 1x pot of silicone/PTFE grease for pneumatic assembly and 1x pot of lithium grease for gear set.
    • 1x "MDRX happy gear" velcro patch

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Silverback MDR-X Airsoft AEG Rifle - Two Tone (Black / FDE) (V2)

  • Brand: Silverback
  • Product Code: 8558
  • Availability: 1
  • $800.00


Available Options




















THIS RIFLE IS NOT FOR BEGINNING PLAYERS

The Silverback MDR-X is our airsoft licensed version of its real steel counterpart manufactured by Desert Tech LLC.

Very realistic in its conception, to mimic the original build and features as much as possible while integrating a high-quality gearbox , able to deliver high performance from DMR to CQB applications.

Realistic construction and assembly

  • Made under exclusive license from Desert Tech LLC
  • Fully engraved markings with unique serial number.
  • 6000 series aluminium receiver/outer barrel and muzzle brake.
  • PA6 Nylon, fiberglass reinforced stock, grip and handguard, synthetic rubber buttpad.
  • MLOK handguard, with 3 slots at 3, 6 and 9 o’clock.
  • 2 steel QD attachments at the rear of the stock.
  • Ambidextrous fire selector and 3 points magazine release.
  • Swappable realistic ejection panels.
  • Realistic motion ambidextrous cocking lever.

 

High quality Gearbox

  • Designed to operate on 11.1V Li-Po batteries (possibility to run on 7.4V)
  • Electronic trigger, CPU motor control, gear cycle and fire selector position detection by Hall Effect sensor.
  • CNC aluminium wide bore cylinder (26mm diameter, +19% wider than standard AEG), including a spring quick change design.
  • Useful volume 22.5 cc ( with stock ventilated 75% cylinder)
  • CNC aluminium cylinder head, NBR piston damper, stainless steel nozzle.
  • CNC aluminium ventilated piston head, FKM o-ring, POM glider ring.
  • CNC stainless steel & aluminium spring guide, equipped with a thrust bearing. 3 lugs design ensuring a better axial alignment.
  • “Tappet plate-less” construction.
  • CNC aluminium piston body, hardened MIM steel 16 teeth rack.
  • 18:1 torque up gear set, hardened MIM steel.
  • ADC 12 aluminium gearbox carter, 10mm ball bearing.
  • Neodymium high-torque motor 19000RPM (11.1V), short axis.

 

Efficient hop-up design

  • Hop-up unit made of durable Polycarbonate material.
  • TDC, rotary ring design.
  • Incremental “click” adjustments using 2 ball plungers, 36 positions ranging from 0 up to 750 µm with the low nub (installed, for standard bbs configuration), and from 500 up to 1250 µm with the high nub (provided, for heavy bbs configuration).
  • 420 mm brass inner barrel. 6.05 mm bore, chemical passivation surface treatment, AEG hop-up cut.

 

The MDRX is coming with:

  • 78 rounds AR10/SR25 type magazine (G&P / A&K Type)
  • Two additional power spring (*).
  • One semi auto only replacement trigger board (semi/ full auto trigger board installed out of the box) (**).
  • A pin puncher for easy battery change and disassembly
  • 4 keys (Allen 2.5mm, Allen 5mm, Torx T20 and Torx T25).
  • One high nub for the hop up unit, to lift bbs from 0.32 grams and above (low nub installed out of the box).
  • One PCB jumper, used to switch from 11.1V to 7.4V batteries or deactivate battery protection (***)
  • Online User Manual

    Online Exploded Views

    Please note that after August 10th, 2023, The Silverback MDRX in our stock has been updated by Silverback, updates are as follows:

    • New bevel gear - Now properly dimensioned, it will reduce strain on battery, motor, and electronic control, and will considerably reduce the noise of the gearbox.
    • New nozzle disconnection Oring - solving inconstancies issues on the original production, this new one will improve feeding and durability.
    • New nozzle/delayer springs - With a better balance, improving feeding with third-party magazines.
    • New delayer screw - Avoiding potential interactions with the spring guide.
    • New motor setting screw - easier to adjust and lock.
    • Better insulated main control PCB (ETU) - Preventing some short circuit potential issues.
    • New Buttpad - Offering direct access to the battery bay, avoiding a full opening and potential damage to motor wiring


    For those who purchased the MDRX AEG before August 10th, 2023, please register your purchase with Silverback here so you could get the parts mentioned above to upgrade your gun as well as a care package that includes the following items: 

    • Tool key for the cylinder head/bb tube/nozzle and motor setting screw
    • 1x pot of silicone/PTFE grease for pneumatic assembly and 1x pot of lithium grease for gear set.
    • 1x "MDRX happy gear" velcro patch

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Related Products

A&K SR-25 Mid-Cap Magazine (110rd) (sr25)

A&K SR-25 Mid-Cap Magazine (110rd) (sr25)

110-round capacity mid-cap magazine for A&K (and compatible) SR-25.Stamped steel shell with high..

$25.00

Silverback MDRX/AR10 Magazine, 78rds

Silverback MDRX/AR10 Magazine, 78rds

MDRX/AR10 Magazine, 78rdsPA6 Nylon fiberglass reinforced magazine, screw-less / pin-less design, Pol..

$25.00

Tags: Silverback, MDR, X, Airsoft, AEG, Rifle, Two, Tone, V2